Automatic Plywood Double Saw (double sizer)

Description:

CHANG I Automatic Plywood Double Saw is designed and manufacturedas the up-to-date roll type high-speed automatic double sawCHANG I Automatic Plywood Double Saw is designed and manufacturedas the up-to-date roll type high-speed automatic double saw to beused in order to fully cope wih the increased production of plywoodin accordance with the requirements for the high accuracy and highspeed.

FEATURES:

1.For longitudinal cutting and cross cutting, this machine isprovided with 8 pieces each of precision rolls which are as largeas 150 mm in diameter, making it possible to accurately perform thepowerful and high-speed feeding of plywood.

2.The air cylinder is installed for the upper-feed roll.Therefore, the uniform and stable pressure is given on the plywoodfor further accuracy in feeding.

3.In order to match the high-speed feeding, the saw shaftsrevolve at the speed as high 7, 000 r.pm.. The bearing higher inaccuracy are used in the precision saw shaft casesthe special beltsfor high speed operation are adopted for the driving with motorandother consideration in detail is also given to the design formanufacture.

4.For deciding the cutting width, the right saw shaft case andthe left saws case are moved by motor driving at the same time.

5.The auto pusher is installed for automatically feeding theplywood, which is cut with the longitudinal cutting saw, at a rightangle to the cross cutting saw.

 

MODEL		DS-4	DS-8
Cuttable size		750-1.250mm	1.000-2.500mm
Thickness cuttable		3-25mm	3-25mm
Circular saws(Dia.x No.)		350mm x 2sets	350mm x 2sets
R.P.M of Circular saws		7, 000 r.p.m	7, 000 r.p.m
Feeding speed(stepless)		25-100 m/min	25-100 m/min
Motor for	For elevating upper roll	0.75kw x 4p x 1/30	0.75kw x 4p x 1/30
	For Circular saws	5.5kw x 2p 2sets	5.5kw x 2p 2sets
	For Feeding	2.2kw x 4p	3.7kw x 4p
	For positioning width	0.4kw x 4p x 1/30	0.4kw x 4p x 1/30

Automatic Plywood Double Saw (double sizer)